Description
- Inside Diameter: 100 mm
- Outside Diameter: 150 mm
- Width: 24 mm
- Basic dynamic load rating: 34.5 kN
- Basic static load rating: 27 kN
FAG HS7020-E-T-P4S Bearing details
| Number | HS7020-E-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, restricted tolerances |
|
| d | 100 mm | |
| D | 150 mm | |
| B | 24 mm | |
| a | 41,1 mm | |
| Da | 141 mm | Tolerance: H12 |
| da | 110 mm | Tolerance: h12 |
| Etk max | 121,8 mm | |
| Etk min | 119,3 mm | |
| Etk1 max | 121,8 mm | |
| Etk1 min | 115,7 mm | |
| r1 min | 1,5 mm | |
| ra max | 1,5 mm | |
| ra1 max | 0,6 mm | |
| rmin | 1,5 mm | |
| α | 25 ° | Contact angle |
| m | 1,38 kg | ≈ Mass |
| Cr | 34500 N | Basic dynamic load rating, radial |
| C0r | 27000 N | Basic static load rating, radial |
| Cur | 2490 N | Fatigue limit load, radial |
| nG Fett | 11000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 17000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 207 N | Preload force |
| FV M | 621 N | Preload force |
| FV H | 1242 N | Preload force |
| KaE L | 596 N | Lift-off force |
| KaE M | 1822 N | Lift-off force |
| KaE H | 3713 N | Lift-off force |
| ca L | 172 N/µm | Axial rigidity |
| ca M | 256 N/µm | Axial rigidity |
| ca H | 333 N/µm | Axial rigidity |
