Description
- Inside Diameter: 40 mm
- Outside Diameter: 68 mm
- Width: 15 mm
- Basic dynamic load rating: 9.4 kN
- Basic static load rating: 5.7 kN
FAG HS7008-C-T-P4S Bearing details
| Number | HS7008-C-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances |
|
| d | 40 mm | |
| D | 68 mm | |
| B | 15 mm | |
| a | 14,7 mm | |
| Da | 62 mm | Tolerance: H12 |
| da | 46 mm | Tolerance: h12 |
| Etk max | 52,3 mm | |
| Etk min | 51,2 mm | |
| Etk1 max | 52,3 mm | |
| Etk1 min | 49,4 mm | |
| r1 min | 1 mm | |
| ra max | 1 mm | |
| ra1 max | 0,3 mm | |
| rmin | 1 mm | |
| α | 15 ° | Contact angle |
| m | 0,211 kg | ≈ Mass |
| Cr | 9400 N | Basic dynamic load rating, radial |
| C0r | 5700 N | Basic static load rating, radial |
| Cur | 590 N | Fatigue limit load, radial |
| nG Fett | 30000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 45000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 34 N | Preload force |
| FV M | 101 N | Preload force |
| FV H | 201 N | Preload force |
| KaE L | 100 N | Lift-off force |
| KaE M | 316 N | Lift-off force |
| KaE H | 659 N | Lift-off force |
| ca L | 30,1 N/µm | Axial rigidity |
| ca M | 47,4 N/µm | Axial rigidity |
| ca H | 64,9 N/µm | Axial rigidity |
